Elite EFS-10 Gate 48H x 60W

Elite EFS-10 Gate 48H x 60W


  • Aluminum Gate
  • Spear Top Pickets
  • Hinges Included
  • Latch Included
SKU: EL-EFS-10-48-60G

Elite EFS-10 Aluminum Gate 48H x 60W

This Elite EFS-10 aluminum gate is 48 inches tall by 60 inches wide and fits a 60 inch opening between gate posts. EFS-10 gates have pressed spear top pickets to match 48 inch tall EFS-10 aluminum fence panels. The vertical pickets slot down through pre-punched holes in the middle of the horizontal rails. Standard Elite gates have a crossbar or brace to keep the gate from sagging over time. Elite gates are made in the USA and powder coated for a maintenance free, rustproof finish. The finish is between shiny and matte. This Elite EFS-10 gate comes with hinges and a handle latch. Elite standard fence panels and gates have visible screws on one side of the horizontal rails.

Order self-closing hinges if you need your gate to close automatically.

Welded Frame Option

Elite gates come with a crossbar or brace to strengthen the gate. You have the option of having the gate frame welded, which will eliminate the cross brace. With this option, there will be a flush bottom bar below the pickets. See photos on the welded gate option product in related items.

EFS-10 Arched and Double Gates

Arched gates are an option for Elite EFS-10 48 inch tall gates. You can create double gates by ordering two of the same gate and making a note during checkout which gates are double gates. Continuous arched gates form a single arch over the span of a double gate. Purchase a drop rod to keep one of your double gates closed. Pull out the drop rod when you want to open both gates.

Decorative Finials

You have the option of using decorative finials instead of the standard pressed spears. You would need 12 decorative finials to replace the pressed spear tops on this gate. Elite will cut the pressed spears off the fence panels to allow the installation of the decorative finials.

Installing a 48H x 60W EFS-10 Gate

The actual gate size is 58.5 inches which allow 1.5 inches for installing the hinges and latch. Install the hinges with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, use blank gate posts when installing between columns. FenceTown help articles and Elite installation guides provide more information on installing gates.

  • Powder coated
  • Aluminum gate
  • Made in the USA
  • Hinges Included – Not Self Closing
  • Latch included
  • Limited lifetime warranty
  • Arched gate available
  • Used with Elite EFS-10 48H fence panels

Elite fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Elite aluminum gates.

Additional information

Weight17 lbs
Dimensions60 × 48 in

Black, Bronze, White, Hartford Green, Walnut Brown, Beige, Sandstone


No, Yes

Pet Panel

No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)