Elite EFS-10 Gate 48H x 36W

Elite EFS-10 Gate 48H x 36W

$187.43$318.14

  • Aluminum Gate
  • Spear Top Pickets
  • Self Closing Hinges Included
  • Latch Included
SKU: EL-EFS-10-48-36G
Clear
  • Description
  • Additional information

Elite EFS-10 Aluminum Gate 48H x 36W

This Elite EFS-10 aluminum gate is 48 inches tall by 36 inches wide. This gate is made to fit a 36 inch opening between gate posts. EFS-10 gates have pressed spear top pickets to match 48 inch tall EFS-10 aluminum fence panels. The vertical pickets slot down through pre-punched holes in the middle of the horizontal rails. Standard Elite gates have a crossbar or brace to keep the gate from sagging over time. Elite gates are made in the USA and powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte. This Elite EFS-10 gate comes with self closing hinges and a handle latch. Elite standard fence panels and gates have visible screws on one side of the horizontal rails.

Welded Frame Option

Elite gates come with a crossbar or brace to strengthen the gate. You have an option of having the gate frame welded which will eliminate the crossbrace. With this option, there will be a flush bottom bar below the pickets. See photos on the welded gate option product in related items.

EFS-10 Arched and Double Gates

Arched gates are an option for Elite EFS-10 gates and are made up to 72” wide. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Continuous Arched gates are used to create a single arch over the span of a double gate. Purchase a drop rod to keep one of your double gates closed. Pull out the drop rod when you want to open both gates.

Decorative Finials

You have an option of using decorative finials instead of the standard pressed spears. You would need 7 decorative finials to replace the pressed spear tops on this gate. Elite will cut the pressed spears off the fence panels to allow installation of the decorative finials.

Installing a 48H x 36W EFS-10 Gate

Elite 36 inch wide gates are made to fit a 36 inch opening between gate posts. Actual gate size is 34.5 inches which allows 1.5 inches for the self closing hinges and latch to be installed. Install the hinges with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, it is recommend to use blank gate posts when installing between columns. FenceTown help articles and Elite installation guides provide more information on installing gates.

  • Powder coated
  • Aluminum gate
  • Made in the USA
  • Self closing hinges included
  • Latch included
  • Limited lifetime warranty
  • Arched gate available
  • Used with Elite EFS-10 48H fence panels

Elite fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Elite aluminum gates.

Additional information

Weight10 lbs
Dimensions36 × 48 in
Color

Black, Bronze, White, Hartford Green, Walnut Brown, Beige, Sandstone

Arched

No, Yes

Pet Panel

No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)