Elite EFS-10 Gate 42H x 42W
$187.50 – $323.93
- Aluminum Gate
- Spear Top Pickets
- Hinges Included
- Latch Included
- Additional information
Elite EFS-10 Aluminum Gate 42H x 42W
This Elite EFS-10 aluminum gate is 42 inches tall by 42 inches wide and fits a 42 inch opening between gate posts. EFS-10 gates have pressed spear top pickets to match 42 inch tall EFS-10 aluminum fence panels. The vertical pickets slot down through pre-punched holes in the middle of the horizontal rails. Standard Elite gates have a crossbar or brace to keep the gate from sagging over time. Elite gates are made in the USA and powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte. This Elite EFS-10 gate comes with hinges and a handle latch. Elite standard fence panels and gates have visible screws on one side of the horizontal rails.
Order self-closing hinges if you need your gate to close automatically.
Welded Frame Option
Elite gates come with a crossbar or brace to strengthen the gate. You have the option of having the gate frame welded, which will eliminate the cross brace. With this option, there will be a flush bottom bar below the pickets. See photos on the welded gate option product in related items.
EFS-10 Arched and Double Gates
Arched gates are an option for Elite EFS-10 42 inch tall gates. You can create double gates by ordering two of the same gate and making a note during checkout which gates are double gates. Continuous arched gates form a single arch over the span of a double gate. Purchase a drop rod to keep one of your double gates closed. Pull out the drop rod when you want to open both gates.
You have the option of using decorative finials instead of the standard pressed spears. You would need 9 decorative finials to replace the pressed spear tops on this gate. Elite will cut the pressed spears off the fence panels to allow the installation of the decorative finials.
Installing a 42H x 42W EFS-10 Gate
The actual gate size is 40.5 inches, allowing 1.5 inches for installing the hinges and latch. Install the hinges with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, use blank gate posts when installing between columns. FenceTown help articles and Elite installation guides provide more information on installing gates.
- Powder coated
- Aluminum gate
- Made in the USA
- Hinges included – Not Self Closing
- Latch included
- Limited lifetime warranty
- Arched gate available
- Used with Elite EFS-10 42H fence panels
Elite fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Elite aluminum gates.
|Dimensions||42 × 42 in|
Black, Bronze, White, Hartford Green, Walnut Brown, Beige, Sandstone