Elite EFF-25 Gate 60H x 48W

Elite EFF-25 Gate 60H x 48W


  • Aluminum Gate
  • Flat Top Rail
  • Spear Top Pickets
  • Hinges Included
  • Latch Included
SKU: EL-EFF-25-60-48G

Elite EFF-25 Aluminum Gate 60H x 48W

This Elite EFF-25 aluminum gate is 60 inches tall by 48 inches wide and fits a 48 inch opening between gate posts. EFF-25 gates have a flat top rail along with alternating pressed spear pickets between the top two rails. The gate matches 60 inch tall EFF-25 aluminum fence panels. The vertical pickets slot down through pre-punched holes in the middle of the horizontal rails. Standard Elite gates have a crossbar or brace to keep the gate from sagging over time. Elite gates are made in the USA and powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte. This Elite EFF-25 gate comes with swing hinges and a latch. Elite standard fence panels and gates have visible screws on one side of the horizontal rails.

Order self-closing hinges if you would like your gate to close automatically.

Welded Frame Option

Elite gates come with a crossbar or brace to strengthen the gate. You have the option of having the gate frame welded, which will eliminate the cross brace. With this option, there will be a flush bottom bar below the pickets. See photos on the welded gate option product in related items.

Pet Panel Option

Elite fence panels and gates have the option of adding a welded puppy panel or pet picket to the bottom. Pet panel picket spacing is 1 5/8 inches, keeping pets safe in your yard and other animals out.

EFF-25 Arched and Double Gates

Arched gates are an option for 60 inch tall Elite EFF-25 gates. You can create double gates by ordering two of the same gate and making a note during checkout which gates are double gates. Continuous arched gates form a single arch over the span of a double gate. Purchase a drop rod to keep one of your double gates closed. Pull out the drop rod when you want to open both gates.

Decorative Finials

You have the option of using decorative finials instead of the standard pressed spears. This EFF-25 gate has 5 spear top vertical pickets, so you will need 5 finials. Elite will cut the pressed spears off the fence panels to allow for the installation of the decorative finials.

Installing a 60H x 48W EFF-25 Gate

The actual gate size is 46.5 inches which allow 1.5 inches to attach the hinges and the latch. Install the hinges with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, use blank gate posts when installing between columns. FenceTown help articles and Elite installation guides provide more information on installing gates.

  • Powder coated
  • Aluminum gate
  • Made in the USA
  • Hinges included – Not Self Closing
  • Latch included
  • Limited lifetime warranty
  • Arched gate available
  • Pet panel option
  • Used with Elite EFF-25 60H fence panels

Elite fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Elite aluminum gates.

Additional information

Weight12 lbs
Dimensions48 × 60 in

Black, Bronze, White, Hartford Green, Walnut Brown, Beige, Sandstone


No, Yes

Pet Panel

No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)