Elite EFF-20 Gate 72H x 36W
$209.14 – $338.71
- Aluminum Gate
- Flat Top Rail
- Self Closing Hinges Included
- Latch Included
- Used with 72H EFF-20 Panels
- Made in the USA
- Additional information
Elite EFF-20 Aluminum Gate 72H x 36W
This Elite EFF-20 aluminum gate is 72 inches tall by 36 inches wide. This gate is made to fit a 36 inch opening between gate posts. EFF-20 gates have a flat top rail to match 72 inch tall EFF-20 aluminum fence panels. The vertical pickets slot down through pre-punched holes in the middle of the horizontal rails. Standard Elite gates have a crossbar or brace to keep the gate from sagging over time. You have the option of adding decorative circles or scrolls to this gate. Elite gates are made in the USA and powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte. This Elite EFF-20 gate comes with self closing hinges and a gravity latch. Elite standard fence panels and gates have visible screws on one side of the horizontal rails.
Welded Frame Option
Elite gates come with a crossbar or brace to strengthen the gate. You have an option of having the gate frame welded which will eliminate the crossbrace. With this option, there will be a flush bottom bar below the pickets. See photos on the welded gate option product in related items.
Pet Panel Option
Elite fence panels and gates have the option of adding a puppy panel or pet picket to the bottom. These pet panels are welded onto the fence panel before powder coating. Pet panel picket spacing is 1 5/8 inches which will keep pets safe in your yard and other animals out.
Swimming Pool Gate
Elite EFF-20 gates at 72 inches tall should make most local swimming pool codes with the welded frame option. Most pool codes require 45 inches between the two innermost horizontal rails so a child can’t pull themselves over. Check your local building codes for the requirements to make pool code in your area. Add the welded frame option to make this gate pool code compliant.
EFF-20 Arched and Double Gates
Arched gates are an option for Elite EFF-20 gates and are made up to 72” wide. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Continuous Arched gates are used to create a single arch over the span of a double gate. Purchase a drop rod to keep one of your double gates closed. Pull out the drop rod when you want to open both gates.
Installing a 72H x 36W EFF-20 Gate
Elite 36 inch wide gates are made to fit a 36 inch opening between gate posts. Actual gate size is 34.5 inches which allows 1.5 inches for the self closing hinges and latch to be installed. Install the hinges with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, it is recommend to use blank gate posts when installing between columns. FenceTown help articles and Elite installation guides provide more information on installing gates.
- Powder coated
- Aluminum gate
- Made in the USA
- Self closing hinges included
- Latch included
- Limited lifetime warranty
- Arched gate available
- Pet panel option
- Used with Elite EFF-20 72H fence panels
Elite fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Elite aluminum gates.
|Dimensions||36 × 72 in|
Black, Bronze, White, Hartford Green, Walnut Brown, Beige, Sandstone