Elite EFF-20 Gate 54H x 72W

Elite EFF-20 Gate 54H x 72W


  • Aluminum Gate
  • Welded Frame
  • Flat Top Rail
  • Pool Code Gate
  • Self Closing Hinges Included
  • Latch Included
SKU: EL-EFF-20-54-72G
  • Description
  • Additional information

Elite EFF-20 Aluminum Gate 54H x 72W

This Elite EFF-20 aluminum gate is 54 inches tall by 72 inches wide and made to fit a 72 inch opening between gate posts. EFF-20 gates have a flat top rail to match 54 inch tall EFF-20 aluminum fence panels. Elite pool code gates have a welded frame for strength and durability. The vertical pickets slot down through pre-punched holes in the middle of the horizontal rails. Elite gates are powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte. This Elite EFF-20 gate comes with self closing hinges and a pool safety latch.

Swimming Pool Gate

Elite EFF-20 gates at 54 inches tall should make most local swimming pool codes. Most pool codes require 45 inches between the two innermost horizontal rails so a child can’t get a foothold and pull themselves over. Check your local building codes for the requirements to make pool code in your area.

EFF-20 Arched and Double Gates

Arched gates are an option for Elite EFF-20 gates and are made up to 72” wide. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Continuous Arched gates are used to create a single arch over the span of a double gate. Purchase a drop rod to keep one of your double gates closed. Pull out the drop rod when you want to open both gates.

Installing a 54H x 72W EFF-20 Gate

Elite 72 inch wide gates are made to fit a 72 inch opening between gate posts. Actual gate size is 70.5 inches which allows 1.5 inches for the self closing hinges and latch to be installed. Install the hinges with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, it is recommend to use blank gate posts when installing between columns. FenceTown help articles and Elite installation guides provide more information on installing gates.

  • Powder coated
  • Aluminum gate
  • Made in the USA
  • Welded frame
  • Self closing hinges included
  • Pool code latch included
  • Limited lifetime warranty
  • Arched gate available
  • Used with Elite EFF-20 54H fence panels

Elite fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Elite aluminum gates.

Additional information

Weight15 lbs
Dimensions72 × 54 in

Black, Bronze, White, Hartford Green, Walnut Brown, Beige, Sandstone


No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)