Delgard Aero Avalon Gate 72H x 60W

Delgard Aero Avalon Gate 72H x 60W


  • Aluminum Gate
  • Pressed Spear Tops
  • Welded Frame
  • “A” Brace for Strength
  • Self Closing Hinges Included
  • Used with 72H Aero Avalon Fence
SKU: DG-Aero-Avalon-60-72G
  • Description
  • Additional information

Delgard Aero Avalon Gate 72H x 60W

Delgard Aero Avalon aluminum gate is made to fit a 60 inch opening. Aero Avalon gates have pressed spear tops and 4 horizontal rails to match 72 inch tall Delgard Aero Avalon aluminum fence panels. Delgard Aero gates have a welded frame for strength and durability and a half inch welded “A” brace between the top two horizontal rails. This brace adds strength to the gate frame and helps to keep the gate from sagging. The pressed spear pickets slot down through pre-cut holes in the middle of the horizontal rails. Delgard Aero gates are sold by their opening size, so a 60” gate fits into a 60” opening between posts.

Decorative finials are an option instead of the standard pressed spear tops. You would need 7 decorative finials to replace the pressed spear tops on this aero gate. Finials do not come installed on an Aero Avalon gate, you will have to install them in the field. Delgard Aero gates are powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte. Aero gates come with self closing hinges. A gate latch is not included.

Delgard Aero Avalon Arched and Double Gates

Arched gates are an option for Delgard Aero Avalon gates. Arched Gates are made up to 60” wide and Rainbow Gates cover up to a 10’ or 12’ opening. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Rainbow Gates (Continuous Arch) are used to create a single arch over the span of a double gate. Double gates come with a single drop rod to keep one gate closed. Pull out the drop rod when you want to open both gates.

Installing a 72H x 60W Aero Avalon gate

When installing an Aero Avalon gate between two gate posts, leave an opening of 60 inches between the inside of the gate posts. Install the hinges and latch with the provided self tapping screws. If you are installing this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To install the gate in the middle of a column, you will need to build a shim that will allow the hinges to be installed and be able to open. If possible, it is recommend to use blank gate posts when installing between columns. Our help articles and installation guides provide more information on installing Delgard gates.

  • Powder coated
  • Aluminum gate
  • Made in the USA
  • Welded frame
  • “A” Brace for Strength
  • Latch Not Included
  • Self closing hinges included
  • Limited lifetime warranty
  • Used with Delgard Aero Avalon 72H fence panels

Aero fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Aero aluminum gates.

Additional information

Weight20 lbs
Dimensions60 × 72 in

Black, Bronze, White


No, Yes

Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)