Specrail Corner Post 72H – Industrial Saybrook
- Aluminum Corner Post
- Powder Coated
- Post Cap Included
- Used with 72H Saybrook Industrial Panels
- Additional information
Corner Post for 72H Specrail Industrial Saybrook Fence
This corner post is used with 72 inch tall Saybrook Industrial aluminum fence panels. Specrail corner posts are installed when you need a 90 degree angle on a fence run. A corner post has pre-routed holes punched on two sides of the post to attach two fence panels. Aluminum fence panels have a short section on the horizontal rails that will slot into the pre-routed holes on the post. Use the provided powder coated stainless steel screws to secure the fence panel onto the post. Specrail posts, panels, and gates, are powder coated for a maintenance free, rust proof finish.The finish is between shiny and matte. Actual post height is 100 inches. Industrial post size is 2.5 x 2.5 with a wall thickness of 0.075 inches.
Installing a 72H Corner Post
There are a few methods you can use to install 72H Saybrook corner posts. The most often used method is to dig a hole in the ground and cement them in. The actual length of this post is 100 inches, which will allow almost two feet to go into the ground. If you want to mount the posts on a hard surface, it is recommended to core drill into the hard surface. Base mounts will not hold the weight of the fence panel and post if pressure is applied over time. If you live in a cold area, dig the post hole an extra foot deeper, add gravel, then cement the post in. This will prevent the post from moving upward when the ground freezes.
- Powder coated
- Aluminum post
- Made in the USA
- Post cap included
- Limited lifetime warranty
- 2.5 x 2.5 wall thickness is 0.075
- Used with Specrail Saybrook 72H Industrial fence panels
Saybrook industrial fence panels, gates, and accessories are sold separately.
FenceTown help articles contain more information on Specrail posts.
|Dimensions||100 × 2.5 × 2.5 in|
Black, Bronze, White