Specrail Blank Post 72H – Industrial Saybrook
- Aluminum Blank Post
- Powder Coated
- Post Cap Included
- Used with 72H Saybrook Industrial Panels
- Additional information
Blank Post for 72H Specrail Industrial Saybrook Fence
This blank post is used with 72 inch tall Saybrook Industrial aluminum fence panels. A blank post is commonly used when you need to make angles other than 90 degrees or when stair stepping fence panels are required. Use angle brackets one one side of the post to angle the fence panel, and wall brackets to attach the fence panel to a longer blank post to stair step. Standard post caps are included with all Specrail posts. Specrail posts, panels, and gates, are powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte. Actual post height is 100 inches which provides two feet extra to cement into the ground. Industrial post size is 2.5 x 2.5 with a wall thickness of 0.075 inches.
Installing a 72H Blank Post
There are a few methods you can use to install 72H blank posts. The most often used method is to dig a hole in the ground and cement them in. The actual length of this post is 100 inches, which will allow almost two feet to go into the ground. If you want to mount the posts on a hard surface, it is recommended to core drill into the hard surface. Base mounts will not hold the weight of the fence panel and post if pressure is applied over time. If you live in a cold area, dig the post hole an extra foot deeper, add gravel, then cement the post in. This will prevent the post from moving upward when the ground freezes.
- Powder coated
- Aluminum blank post
- Made in the USA
- Post cap included
- Limited lifetime warranty
- 2.5 x 2.5 wall thickness is 0.075
- Used with Specrail Saybrook 72H Industrial fence panels
Fence panels, gates, and accessories are sold separately.
FenceTown help articles contain more information on Specrail posts.
|Dimensions||100 × 2.5 × 2.5 in|
Black, Bronze, White