Specrail Bennington Commercial Gate 48H x 36W
$229.50 – $389.50
- Aluminum Gate
- Welded Frame
- Pressed Spear Pickets
- Self Closing Hinges Included
- Commercial Grade
- Additional information
Specrail Bennington Commercial Aluminum Gate 48H x 36W
This Specrail Bennington Commercial aluminum gate is made to fit a 36 inch opening between gate posts. Bennington gates have pressed spear tops to match 48 inch tall Bennington Commercial aluminum fence panels. Specrail gates have a welded frame for strength and durability and welded corner gussets which strengthen the gate and keep it from sagging over time. The pressed spear pickets slot down through pre-punched holes in the middle of the horizontal rails. Decorative finials are an option instead of the standard pressed spear tops. You would need 7 decorative finials to replace the pressed spear tops on this gate. Specrail will cut the pressed spears off and install the finials on the gate. Specrail gates are powder coated for a maintenance free, rust proof finish. The finish is between shiny and matte. There is an option for a pet panel to be welded onto the gate before powder coating. This pet panel is a great way to keep your pets safe, while keeping other animals out.
A latch is not included with this gate, purchase a Specrail latch to complete your gate.
Bennington Commercial Arched and Double Gates
Arched gates are an option for Specrail Bennington Commercial gates and are made up to 72” wide. You can create double gates by ordering two of the same gate, and making a note during checkout which gates are double gates. Continuous Arched gates are used to create a single arch over the span of a double gate. Drop rods are included with double gate orders and are used to keep one gate closed. Pull out the drop rod when you want to open both gates.
Installing a 48H x 36W Bennington Commercial Gate
Specrail 36 inch wide gates are made to fit a 36 inch opening between gate posts. Actual gate size is 34.5 inches which allows 1.5 inches for the self closing hinges and latch to be installed. Install the hinges with the provided powder coated stainless steel self tapping screws. If you are hanging this gate between columns that are wider than 2 inches, you will have to install the hinges on the corner of the column. To hang the gate in the middle of a column, you will need to build a shim that will allow the hinges to be attached so the gate swings open. If possible, it is recommend to use blank gate posts when installing between columns. Our help articles and Specrail installation guides provide more information on installing gates.
- Powder coated
- Aluminum gate
- Made in the USA
- Welded frame
- Self closing hinges included
- Limited lifetime warranty
- Arched gates available
- Pet panel available
- Commercial grade
- Used with Specrail Bennington 48H Commercial fence panels
Specrail fence panels, posts, and accessories are sold separately.
FenceTown help articles contain more information on Specrail Commercial aluminum gates.
|Dimensions||36 × 48 in|
Black, Bronze, White